1947-1955 Chevy/GMC Truck 2 Piece Headliner

We are taking the White Wolf Speed Shops headliners and wrapping them in matching vinyl. This is by far the best fitting headliner out there. Comes with 2 abs pieces, individually wrapped in vinyl.
 
47-49 cab identification
Has a non-floating center trim. The front panel is held in place by the center trim being screwed to the roof center cross member and retained by the front metal window trim.
Weather stripping around the doors is held in place by a screw on trim. The roof panel is profiled to fit around these screw holes.
The center trim is located closer towards the front windshield and not as far back as the later years.
Filler strips were supplied from factory to fill the gaps located on the pillars between the windshield and door weather stripping retainer trim.
 
The UNICORN cab identification
This cab falls between the early and late 49 cabs.
The weatherstripping rubber trim in this cab is held on with the new style slide in retainer that is spot welded to the cab interior face.
The roof center trim is still the screw in type and located closer towards the front windshield and not as far back as the later years.
 
49-53 cab identification
Has floating center trim. Trim slides over front panel. Then rear panel slides into back side of floating trim.
Center roof supports still appear on some trucks but no center trims screw into it. Also, other cabs have no roof supports installed at all.
Weather stripping has a welded channel around the door and is slid into place. No screw fasteners are required.
The center trim is located further back in the cab.
Also, NO filler strips from factory were required to fill the gaps located on the pillars between the windshield and door weather stripping .\
 
Depending on current stock, may take up to 2 weeks to ship